VMware Aria Suite Lifecycle migrates VMware Identity Manager data for vRealize Automation 7.5, 7.6, 8.0 to Global Environment of VMware Identity Manager 3.3.3 and later.
VMware Aria Suite Lifecycle migrates:
- Tenants
- Directories
- Custom groups
- Roles and rule set
- User attributes
- Access policies
- Network ranges
- Third-party IDP configurations
Prerequisites
- The SMTP information of the source tenant must be configured on the Global Environment of VMware Identity Manager. This information is required to receive email instructions to reset the password for all local users. All local users in the source tenant must have valid email IDs before migrating tenants.
- For migration, you must enable remote connection from the Global Environment of VMware Identity Manager to the vRealize Automation 7.x database. Refer to KB 81219 for more information on enabling remote connection.
- Ensure that you have DNS configured in VMware Aria Automation and VMware Identity Manager. For more information on DNS and certificate requirements, refer to DNS and Certificate Requirement in the VMware Aria Suite Lifecycle documentation.
- Ensure that the source vRealize Automation 7.x environment is in a healthy state and directories are synced before tenant migration.
Procedure
- On the My Services dashboard of VMware Aria Suite Lifecycle, click Identity and Tenant Management.
- Select Tenant Management, and then click Tenant Migrations.
- Read the information on VMware Identity Manager Tenant Migration and VMware Aria Automation Tenant Mapping, and then click Continue.
- On the Environment Selection tab, select the Source Environment and Target Environment. Based on your source and the target environment selection, you can view a tabular representation of the available tenants on the source vRealize Automation. You can also view the status of the migrated or merged tenants on VMware Aria Automation 8.x.
- Click Next.
- On the Tenant Migration Workflow page, you can view the workflow of Tenant Migration and Tenant Merge, and understand the correlation between the two operations.
In Tenant migration, the specific data of VMware Identity Manager is migrated to the destination tenant of Global Environment using VMware Aria Suite Lifecycle. VMware Aria Suite Lifecycle also creates 7.x endpoint when adding a new tenant on VMware Aria Automation 8.x. In Tenant Merge, the directories and tenants are already created on the source VMware Aria Automation 8.x. VMware Aria Suite Lifecycle creates the 7.x endpoint to the existing tenants on VMware Aria Automation 8.x, so that you can migrate the business groups, infrastructure, and other specific tenants on VMware Aria Automation.
- Click SAVE AND NEXT and read the list of manual steps which must be performed to proceed with the migration. Select the check box to confirm that you have read and verified the prerequisites and limitations.
- To specify the Tenant Migration Workflow, enter these details on the Tenant Details tab.
- Select the Source Tenant.
Note: The source tenants which are listed are not the migrated or merged tenants.
- Enter the Tenant Name.
- Under Target Tenant administrator details, enter the Target Tenant Username, First Name, Last Name, valid Email ID, and Password.
- Click SAVE AND NEXT. To specify a directory that must be migrated from the source vRealize Automation 7.x to VMware Aria Automation 8.x tenant, select one of these directories on the Directory Migration tab.
- System Directory: Connector selection and password creation are not required.
- JIT directory: Connector selection and password creation are not required.
- Active Directory over LDAP: Select a Windows or Linux target Connector and enter the BindPassword.
- OpenLDAP: Select a Windows or Linux target Connector and enter the BindPassword.
- Active Directory with IWA: You can only select a Windows target Connector for the VMware Identity Manager 3.3.3 version. Enter the Bind Password and Domain Admin Password that is required for migration.
Note: To migrate a directory is a one-time operation, select all the directories which must be migrated. If the required directories are not selected during migration, you have to perform this operation manually.
- Click Validate. After a successful validation, click SAVE AND NEXT.
- Click Run Precheck to validate the tenant details and certificate details. Click SAVE AND NEXT.
- On the Summary Step tab, you can view the summary of your selections.
- Click SUBMIT if your validations are successful.
If the validations are not successful and you want to make changes, and then resume the tenant migration operation, click SAVE AND EXIT. The same wizard can be opened anytime to rerun the precheck to complete and proceed.
Results
You can view the tenant migration details under the Request Details page. Both VMware Identity Manager and VMware Aria Automation tenants can be accessed through its tenant FQDNs.
FAQs
Step-by-step guide to Microsoft 365 tenant migration
- Step 1: Pre-migration planning and assessment. ...
- Step 2: Set up your target tenant. ...
- Step 3: Prepare source and target tenants. ...
- Step 4: Domain configuration. ...
- Step 5: Mailbox pre-stage (for larger migrations) ...
- Step 6: Data migration. ...
- Step 7: Update user accounts.
You can run tenant migrations using the php artisan tenants:migrate command. You may specify the tenant(s) using the --tenants option. Note: Tenant migrations must be located in database/migrations/tenant . You can run migrations from outside the command line as well.
How do I transfer flows from one tenant to another? ›
Go to https://make.powerapps.com.
- Select the new environment from the environment picker in the upper-right.
- Select Apps.
- Select Import canvas app.
- Upload the app package file.
- Complete all of the import option selections, and then select Import.
- Repeat these steps until all apps have been imported.
Tenant-to-tenant migrations are commonplace in today's fast-paced IT landscape. For IT professionals, technology's exponential growth brings more challenges to this already complex process, from managing data sprawl to ensuring security and compliance and addressing learning and adoption.
Can I swap tenants? ›
Swapping your tenancy is also a form of assignment. You must have your landlord's permission before you swap your tenancy with someone else.
What is the right to relocate a tenant? ›
Landlord shall have the right, at its option, upon at least thirty (30) days' prior written notice to Tenant, to relocate Tenant and to substitute for the Leased Premises other space in the Building or in the Park, containing at least as much rentable area as the Leased Premises.
How do I change my tenant location? ›
The only way to change the Office 365 tenant location is by creating a new Office 365 tenant on your desired location and migrating the data from the old Office 365 to it.
What is the migrate command? ›
The MIGRATE command requests the type of space management you want DFSMShsm to do: migration, data set deletion, or data set retirement. You can issue the MIGRATE command to cause space management for: All eligible data sets from a specific level 0 volume.
Which command is used to create a migration? ›
How to create a migration. Laravel provides an Artisan command called make:migration that you can use to generate a migration file for your database, saving you the stress of doing it manually. Each migration file defines a table in your database containing the schema to create or modify the table in the database.
What is a rent transfer? ›
Transfer Rent means any rent or other consideration paid to Tenant, directly or indirectly, by any transferee, or any other amount received by Tenant from or in connection with any Transfer (excluding consideration for any of Tenant's furniture, furnishings, fixtures, equipment and other items of personal property, the ...
How to Transfer Power Automate Flow to Another User?
- Open Power Automate and go to “My Flows”.
- Select the flow you want to assign a co-owner to.
- Click on the ellipsis (…) and choose “Share”.
- Enter the email address of the co-owner and set their permissions as “Co-owner”.
- Click “Share” to save the changes.
To convert your account from single-tenant to multi-tenant, go to the Company profile page of the console and select Convert to multi-tenant console.
What is tenant-to-tenant migration without rebranding? ›
Tenant-to-tenant migration without rebranding: This involves a business unit and brand identity that have been sold together. The identities will migrate to a target tenant and will keep the existing domain as part of the migration.
How do landlords shift risk to tenants? ›
A landlord can require a tenant to carry renter's insurance as part of the lease agreement. This can transfer some of the financial responsibility of the property to the tenant, should the tenant be held responsible for the damage. The landlord's own insurance policy can also be a form of risk transfer.
What is tenant displacement? ›
A tenant is permanently displaced if they are evicted for a No-Fault reason such as: o A landlord evicts a tenant so that they or their family member can move into the tenant's unit, o Withdrawal of the unit from rental market (Ellis Act) or, o A government mandate. •
Can you replace a tenant? ›
For those tenants who wish to terminate their tenancy agreement before the “FIXED TERM” of their tenancy agreement has expired, this can only be done with the landlord's permission and this will usually involve the signing of a new tenancy contract with a suitable replacement tenant and guarantor.
What is tenant to tenant migration without rebranding? ›
Tenant-to-tenant migration without rebranding: This involves a business unit and brand identity that have been sold together. The identities will migrate to a target tenant and will keep the existing domain as part of the migration.
How to migrate power platform from one tenant to another? ›
Migrate Power Platform environments from one tenant to another
- Step 1 – Initiate the Migration Process: ...
- Step 2 – Obtain Tenant Name and ID: ...
- Step 3 – Find the Organization URL and ID: ...
- Step 4 – Provide Migration Details: ...
- Step 5 – Export apps and flows: ...
- Step 6 – Create New Users in the Destination Tenant:
Steps to Add a Tenant to an Existing Lease
- Step 1: Communication with the Landlord. Contact your landlord to inform them of your intention to add a tenant to the lease. ...
- Step 2: Collecting Necessary Documentation. ...
- Step 3: Amending the Lease Agreement. ...
- Step 4: Signing the New Lease Agreement.
