Rated 3.78 out of 5 based on 9 customer ratings
3.78 (9 reviews)
HeatWave SuperQuiet® is the TOP selling and most sought after heat pump on the market. With a pure Titanium ThermoLink® Heat Exchanger at its core – the HeatWave SuperQuiet® Series offers you optimum return on your investment.
Making the right choice just got a whole lot easier. All of our HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Some of the HeatWave SuperQuiet® models are also ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures.
Rated in accordance with AHRI standard 1160.
Now you can control your heat pump right through your smartphone. Change the mode to heat, cool or autotemp (when applicable), and set your temperature through the PoolSync app.
*Additional purchase of PoolSync WiFi Controller required
AHRI’s globally recognized and industry respected heat pump pool heaters certification program provides outstanding value to equipment and component manufacturers, customers, and government regulators. AHRI Certified® products are subject to rigorous and continuous testing by a third-party laboratory under contract to AHRI. Only products certified by AHRI are listed in AHRI’s Directory of Certified Product Performance, a real-time database at web page. More information can be found online on the heat pump pool heaters Certification Program (web page), and the heat pump pool heaters contractors (web page).
California residents – Click here for Proposition 65 warning
Category: HeatWave SuperQuiet
- Features
- Specs 60Hz
- Specs 50Hz
- Warranty
- Reviews (9)
Features
The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics.
• Patented hydraulic design adds only 2 PSI at 45 gpm, increasing compatibility with two-speed & variable speed pumps
• Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate
• Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool
Corrosion Proof Cabinet
• Louvered side panels protect evaporator coil while ensuring efficient air flow
• Rust and fade proof
• Impact resistant
• Built-in drain pan provides condensate management
Microprocessor Controlled with DigitalDisplay
• Weather protected control with full text display provides easy-to-read menu options and unit status
• Ability to connect to most external controllers for heating and cooling mode
• Most common variable speed pumps can be programmed using the heat pump Smart Controller (HP9) or (HP11)
PoolSync® Ready
Adjust the mode to heat, cool or autotemp (when applicable) and set your temperature through the PoolSync app.
*Additional purchase of PoolSync WiFi Controller required
Brochures & Manuals
 Brochure 60Hz English |
| Brochure 60Hz Spanish |
| Brochure 50Hz English |
| Brochure 50Hz Spanish |
| Product Manuals |
Specs 60Hz
| 60 Hz | SQ125 | SQ145 | SQ225 | SQ120R | SQ166R | |
|---|---|---|---|---|---|---|
| BTUs (water temp/ambient air/relative humidity) | ||||||
| 80/80/80 | 101,000 | 121,000 | 143,000 | 110,000 | 126,000 | |
| 80/80/63 | 95,000 | 115,000 | 134,000 | 103,000 | 120,000 | |
| 80/50/63 | 62,000 | 75,000 | 90,000 | 72,000 | 82,000 | |
| Coefficient of Performance (water temp/ambient air/relative humidity) | ||||||
| 80/80/80 | 6.5 | 7.1 | 6.5 | 5.5 | 5.6 | |
| 80/80/63 | 6.1 | 6.8 | 6.1 | 5.3 | 5.3 | |
| 80/50/63 | 4.0 | 4.2 | 4.0 | 4.0 | 4.0 | |
| Refrigerant | R410A | R410A | R410A | R410A | R410A | |
| Electrical | ||||||
| Heat or Heat & Cool | H | H | H | H & C | H & C | |
| kW Input | 4.6 | 5.1 | 6.4 | 5.9 | 6.6 | |
| Voltage/Hz/Phase
| A | A, B & G | A, B, E & G | A & B | A, B, E & G | |
| Maximum Fuse Size | A – 60 | A – 60 B – 50 G – 20 | A – 60 B – 50 E – 30 G – 25 | A – 60 B – 50 | A – 60 B – 50 E – 30 G – 25 | |
| Minimum Circuit Ampacity | A – 40.5 | A – 42.1 B – 31.0 G – 14.2 | A – 42.1 B – 33.3 E – 18.4 G – 16.2 | A – 38.5 B – 31.0 | A – 42.1 B – 33.3 E – 18.4 G – 16.2 | |
| Water Flow *A Heater Bypass Kit is required when flow rates exceed the maximum | ||||||
| Minimum/Maximum (gpm) | 30/70 | 30/70 | 30/70 | 30/70 | 30/70 | |
| Physical | ||||||
| Weight (lbs) | 258 | 305 | 315 | 273 | 310 | |
Length x Width x Height (in) | 34″ x 34″ x 44″ | 34″ x 34″ x 44″ | 34″ x 34″ x 44″ | 34″ x 34″ x 44″ | 34″ x 34″ x 44″ | |
| Shipping | ||||||
| Weight (lbs) | 298 | 345 | 355 | 313 | 350 | |
| Length x Width x Height (in) | 37″ x 36″ x 51″ | 37″ x 36″ x 51″ | 37″ x 36″ x 51″ | 37″ x 36″ x 51″ | 37″ x 36″ x 51″ | |
| Rated in accordance with AHRI standard 1160 water temp/ambient air/relative humidity | ||||||
Specs 50Hz
| 50 Hz | SQ225 | SQ166R |
|---|---|---|
| Efficiency | ||
| KW Output | 35.2 | 31.7 |
| BTU Output | 120,000 | 108,000 |
| Coefficient of Performance (C.O.P) | 6.5 | 5.6 |
| KW Input | 5.4 | 5.7 |
| Electrical | ||
| Heat or Heat & Cool | H | H & C |
| Voltage/Hz/Phase H – 200-240/50/1 D – 380-420/50/3 | D | D |
| Maximum Fuse Size | D – 25 | D – 25 |
| Minimum Circuit Ampacity | D – 16.2 | D – 16.2 |
| Refrigerant | R410A | R410A |
| Water Flow A Heater Bypass Kit is required when flow rates exceed the maximum | ||
| Minimum/Maximum (m3/h) | 6.8/15.9 | 6.8/15.9 |
| Minimum/Maximum (gpm) | 30/70 | 30/70 |
| Physical | ||
| Weight (kg) | 143 | 141 |
| Weight (lb) | 315 | 310 |
| Length x Width x Height (cm) | 87 x 87 x 112 | 87 x 87 x 112 |
| Length x Width x Height (in) | 34″ x 34″ x 44″ | 34″ x 34″ x 44″ |
| Shipping | ||
| Weight (kg) | 162 | 159 |
| Weight (lb) | 355 | 350 |
| Length x Width x Height (cm) | 94 x 92 x 130 | 94 x 92 x 130 |
| Length x Width x Height (in) | 37″ x 36″ x 51″ | 37″ x 36″ x 51″ |
Warranty
| National Warranty Information |
| International Warranty Information |
| Canada Warranty Information |
| Australia Warranty Information |
| New Zealand Warranty Information |
| Warranty Registration |
9 reviews for HeatWave SuperQuiet®
Jose Gutierrez –
Rated 5 out of 5
I have had a SQ155AHDSBTM since 2014, and it os still working great after almost 7 years, it warms up great, my only issue was a control (screen) failure but was covered under warranty without any issues. This is the best brand in the market, totally recommended. When I ever need another heat pump, I would only go with AquaCal.
Ray Lang –
Rated 5 out of 5
3rd year on my Aquacal heat pump and I love it. Very quiet, heats fast 22,000 gallon pool. 1 degree per hour. Didn’t have any issue on it. This is a great product for us!
Terry Barnett –
Rated 4 out of 5
Update to previous email. The company took care of all issues with the heater AND IT HAS BEEN WORKING GREAT FOR THE LAST 2 YEARS.
UPDATE / The company has taken care of all issues and the heater has been working great for the last 2 years. It heats up quickly and is quiet.I did purchase the extended warranty because of the initial problems we had. After the initial problems it has been trouble free.
Bobby –
Rated 2 out of 5
just had a 36×48 unground pool installed. The heater has been on since thursday and the temp is set for 86. But the temp on display has not gotten above 76 degrees. not sure what to do.
AquaCal Customer Service –
Hi Bobby,
We recommend you call us at 727-823-5642 to gather some more information; i.e. size of the pool (gallons), size of the heat pump, where the pool is locate (city, state, country), etc.
Kim –
Rated 3 out of 5
Have the same issue as other people. Display shows code ota, apparently it’s an over temperature alarm. Not sure what is going on because the water is barely 70 degrees. Can’t get ahold of anybody because it’s the weekend. Some people work during the week. 😕
AquaCal Customer Service –
Hi Kim,
Thank you for contacting AquaCal AutoPilot, we are working since Saturday to resolved your issues! We will contact you today to schedule an appointment!
Jason –
Rated 3 out of 5
Product worked well for a little then had to replace screen module… now it registers water at 103 but it’s only 65 so it won’t turn on to heat.
AquaCal Customer Service –
Hi Jason,
You may have a water temperature sensor issue. Please call us at 727-823-5642 and we will be happy to assist you.
Terry Barnett –
Rated 2 out of 5
Bought a SQ120 IN 2014. Started making a loud noise after about 6 months. Took several repair trips to fix. Now its takes 12+ hours to heat 5 degrees.Very disappointed in this heater. Live in FL. where it is warm….
Maria Martinez –
Hello Terry,
Thanks for taking the time to reach out and share your experience with our team. We’d love to chat with you further to gather more information from you and work towards a resolution. We’ll be reaching out via email, so keep your eyes peeled on your inbox.
Jessica Gutierrez –
Rated 5 out of 5
This heat pump works great!! It heats about one (1) degree per hour, it does consumes about 7.5 Kwh in case you’re wondering, I wish it would be a little more energy efficient, but all the other features and the way it heats up the pool is great. I have a 12,000 gal pool and it heats it up to 86 degrees in about 3-4 hours
fpalazo –
Rated 5 out of 5
This thing is awesome it heats the spa really quick and hardly makes any noise at all, If I did not feel the water the only way to tell if it is running is to walk over and see if the fan is spinning. I would defiantly purchase again!!
Leave a customer review
Related products
- HeatWave SuperQuiet® SQ145
Rated 5.00 out of 5
- HeatWave SuperQuiet® SQ166R
- HeatWave SuperQuiet® SQ225
- HeatWave SuperQuiet® SQ120R
