Grinding stones and diamond grinding discs (2024)

Struers - Ensuring Certainty / Products / Grinding and Polishing / Grinding and Polishing Consumables / Grinding stones and diamond grinding discs

Grinding stones and diamond grinding discs (1)

High removal grinding for any material

Ideal for high-volume, high-throughput set-ups, our wide range of grinding stones and diamond grinding discs provides exceptional high removal grinding to reduce your overall preparation time.

  • Achieve optimal planeness very quickly – and reduce the time spent on your fine grinding step
  • Maximize your quality and reproducibility with a dedicated stone or disc for your material

Buy in Webshop

Contact us

  • Intro
  • Benefits
  • Features
  • Facts
  • Contact

Balance high removal and low deformation

High material removal often comes at the cost of deformation, increasing the time or removal needed in the following step. Our grinding stones and diamond grinding discs are optimized to provide high, consistent removal with low deformation. This reduces the time spent on your fine grinding step and your overall preparation time – ideal for high-volume labs, or labs that need a very fast throughput.

Plane grind any type of material

To cater for a wide range of materials, we have developed a variety of different grinding stones. There are stones for softer and harder materials as well as for ductile/brittle materials. For extremely hard materials like sintered carbides or ceramics, we have a diamond grinding discs which reduces the plane grinding time significantly.

Fitting into your process or set-up

Our stones and disc require equipment just for high removal grinding, such as the AbraPlan or Hexamatic. As with all of our equipment and consumables, these have been specifically designed to work together to provide the best results. The high removal provides optimal planeness very quickly, including very uneven specimens where you might not have a materialographic cutting set-up.

Grinding stones and diamond grinding discs (2)
Grinding stones and diamond grinding discs (3)
Grinding stones and diamond grinding discs (4)

KEY FEATURES

Grinding stones and diamond grinding discs (5)

Consistently high removal

In tests, Struers stones had an average removal rate of 474 μm/min, providing high, consistent removal for ultra-fast plane grinding

Grinding stones and diamond grinding discs (6)

Minimal deformation

By limiting deformation in your plane grinding step, you reduce the time and removal needed in your next step

Grinding stones and diamond grinding discs (7)

Optimized to your material

There is a dedicated stone or disc for both softer and harder materials, ductile/brittle materials, as well as extremely hard materials like sintered carbides or ceramics

Grinding stones and diamond grinding discs (8)

Large surface area

Prepare large specimens or many specimens in a very short time with the ability to prepare specimen holders up to 200 mm in diameter

Grinding stones and diamond grinding discs (9)

Grind uneven specimens

If you do not have a materialographic cutting set-up, you can plane grind uneven specimens very quickly with our high removal grinding stones or disc

Grinding stones and diamond grinding discs (10)

Water cooling

Our stones and disc use water for cooling, the ideal coolant for minimizing heat. This also reduces your need for classified products, while allowing for recirculation to save water

Find your ideal high removal grinding solution

Grinding stones and diamond grinding discs (11)

Grinding stone 6A27 & 6A36 #150

• For hard steels or steels containing many carbides in the 500-800 HV range
• Resin-bonded aluminum oxide grinding stone
• Grit 150
• Used for AbraPlan and Hexamatic
Download technical specifications here

Buy in Webshop

Grinding stones and diamond grinding discs (12)

Grinding stone 4A27 & 4A36 #150

• For medium hard ferrous materials in the 250-700 HV range
• Resin-bonded aluminum oxide grinding stone
• Grit 150
Download technical specifications here

Buy in Webshop

Grinding stones and diamond grinding discs (13)

Grinding stone 3A27 & 3A36 #150

• For stainless steel and nickel-based alloys in the 150-500 HV range
• Resin-bonded aluminum oxide grinding stone
• Grit 150
• Used for AbraPlan and Hexamatic
Download technical specifications here

Buy in Webshop

Grinding stones and diamond grinding discs (14)

Grinding stone 2S27 & 2S36 #150

• For non-ferrous materials in the 40-250 HV range
• Resin-bonded silicon carbide grinding stone
• Grit 150
• Used for AbraPlan and Hexamatic
Download technical specifications here

Buy in Webshop

Grinding stones and diamond grinding discs (15)

Diamond grinding disc 8D27 & 8D36 #120

• For ceramics and sintered carbides > 800 HV
• Resin-bonded diamond grinding disc
• Grit 120
• Used for AbraPlan and Hexamatic
Download technical specifications here

Buy in Webshop

See full details and technical specifications

Get a complete overview of our grinding stones and diamond grinding discs together with their full details and technical specifications.

Choose your surface

Would you like tailored advice for your material, task or setup?

Contact our experts

Ensuring certainty Minimize your supply chain risk and ensure uptime with high quality consumables, reliably delivered when you need them. All consumables ship within 48 hours from our distribution centers across the U.S., Japan, China, Germany and Denmark. Our ISO 9001-certified LEAN production and strict, in-house quality control ensure all consumables perform as promised and contribute to a safer workplace. Contact us

Contact us!

How can we help you?

We are always happy to help with any enquiry, big or small. If you have a question, drop us a line and we will get back to you as soon as possible.

For any quotes or questions regarding our consumables, visit our Webshop https://webshop.struers.com/ to easily check your prices.

Contact Struers for inquiries Contact Struers for inquiries
Grinding stones and diamond grinding discs (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Tyson Zemlak

Last Updated:

Views: 6120

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.